1.Youtube reference
Youtube from the same maker.
Others
2. Functions and operations
This tool is used for lens maintenance to detach from the lens body; It is very easy to use by the clean
sucker. You can maintain the lens more easily!
In addition, you can have your piece of the lens and clean it with light as shown in the picture.
I cannot have maintenance without this, now!
Nice evaluation ★★★★ in Japan.
The company of this maker is a challenging Japanese camera accessory maker.
Blower brush has been FIRST developed by the founder in this company.
“Lens Sucker can be picked up, held and moved a lens cleanly without touching your fingers.
It consists of two, large and small, rubber suckers and of two, long and short, pipes.
With combined them, assembly or repair of the lenses or similar optical elements can be most easily done by means of vacuum sucking.
Special quality of rubber sucker leaves no stain on a surface of the lens, but it will be advisable that before using the lens Sucker to have the surface cleaned by cleaning liquidlike ether.”
3. My experiences
Before use, always check the inside of sucker where attaching to your lens. If there are any dusts, wipe away not to put them onto the lens.
The following big one is stable to use, can pull the lens out from the body.
Before removing the lens, please check the location of the lens carefully attached to the body. Since if you reinstall lens again but the location is slightly different, then reassemble may be unsuccessful. It depends on your lens for difficulty.
Smaller sucker does not have enough force to pull lens, so special use only for a very small lens.
eBay site for sale of this tool
Or search by “Japan678 sucker” when additional listing.
If you have any questions, please submit from the following comment form so as to other camera fans to share the information!
IMPORT FROM JAPAN LOCAL SITES: VISIT THIS SITE FOR SUPPORT!
No comments yet.